And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.797
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.857
And
I accept adding "cowsay" to Additional Software
3.910
And
Additional Software is correctly configured for package "cowsay"
0.568
And
I shutdown Tails and wait for the computer to power off
3.794
And
I start Tails from USB drive "__internal" with network unplugged
32.096
And
I enable persistence
10.366
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
6.874
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.036
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.755
And
I can open the Additional Software configuration window from the notification
2.378
And
I shutdown Tails and wait for the computer to power off
13.794
And
I start Tails from USB drive "__internal" with network unplugged
31.708
And
I enable persistence
10.467
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.153
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.045
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045