And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.082
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.591
And
I accept adding "cowsay" to Additional Software
4.968
And
Additional Software is correctly configured for package "cowsay"
0.526
And
I shutdown Tails and wait for the computer to power off
2.726
And
I start Tails from USB drive "__internal" with network unplugged
33.646
And
I enable persistence
10.873
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
6.374
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.026
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.332
And
I can open the Additional Software configuration window from the notification
2.414
And
I shutdown Tails and wait for the computer to power off
17.814
And
I start Tails from USB drive "__internal" with network unplugged
34.923
And
I enable persistence
12.771
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.446
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.076
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050