And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.663
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
4.962
And
I accept adding "cowsay" to Additional Software
4.052
And
Additional Software is correctly configured for package "cowsay"
0.480
And
I shutdown Tails and wait for the computer to power off
2.574
And
I start Tails from USB drive "__internal" with network unplugged
32.227
And
I enable persistence
10.827
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
6.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.031
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.334
And
I can open the Additional Software configuration window from the notification
2.371
And
I shutdown Tails and wait for the computer to power off
12.572
And
I start Tails from USB drive "__internal" with network unplugged
31.746
And
I enable persistence
10.584
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.040