And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.804
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.451
And
I accept adding "cowsay" to Additional Software
4.127
And
Additional Software is correctly configured for package "cowsay"
0.452
And
I shutdown Tails and wait for the computer to power off
3.969
And
I start Tails from USB drive "__internal" with network unplugged
32.505
And
I enable persistence
10.251
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
6.726
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.033
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.886
And
I can open the Additional Software configuration window from the notification
2.403
And
I shutdown Tails and wait for the computer to power off
12.576
And
I start Tails from USB drive "__internal" with network unplugged
32.031
And
I enable persistence
10.347
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.638
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.032
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.041