And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.496
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.566
And
I accept adding "cowsay" to Additional Software
4.033
And
Additional Software is correctly configured for package "cowsay"
0.512
And
I shutdown Tails and wait for the computer to power off
2.539
And
I start Tails from USB drive "__internal" with network unplugged
32.040
And
I enable persistence
10.481
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
6.172
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.135
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.028
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.352
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
17.546
And
I start Tails from USB drive "__internal" with network unplugged
32.209
And
I enable persistence
10.570
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.356
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055