And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.466
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.857
And
I accept adding "cowsay" to Additional Software
4.103
And
Additional Software is correctly configured for package "cowsay"
0.493
And
I shutdown Tails and wait for the computer to power off
3.963
And
I start Tails from USB drive "__internal" with network unplugged
31.990
And
I enable persistence
10.518
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
6.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.027
And
available upgrades have been checked
1.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.852
And
I can open the Additional Software configuration window from the notification
2.572
And
I shutdown Tails and wait for the computer to power off
17.621
And
I start Tails from USB drive "__internal" with network unplugged
32.871
And
I enable persistence
10.543
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.089
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.148
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.025
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077