And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.919
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.078
And
I accept adding "cowsay" to Additional Software
3.913
And
Additional Software is correctly configured for package "cowsay"
0.519
And
I shutdown Tails and wait for the computer to power off
2.664
And
I start Tails from USB drive "__internal" with network unplugged
32.920
And
I enable persistence
10.364
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.176
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.137
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.026
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.279
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
12.662
And
I start Tails from USB drive "__internal" with network unplugged
31.847
And
I enable persistence
10.483
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
6.755
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050