And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.518
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.756
And
I accept adding "cowsay" to Additional Software
4.008
And
Additional Software is correctly configured for package "cowsay"
0.534
And
I shutdown Tails and wait for the computer to power off
3.892
And
I start Tails from USB drive "__internal" with network unplugged
34.540
And
I enable persistence
11.693
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.702
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.033
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.937
And
I can open the Additional Software configuration window from the notification
2.646
And
I shutdown Tails and wait for the computer to power off
17.915
And
I start Tails from USB drive "__internal" with network unplugged
34.153
And
I enable persistence
12.048
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056