And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.173
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.240
And
I accept adding "cowsay" to Additional Software
4.050
And
Additional Software is correctly configured for package "cowsay"
0.457
And
I shutdown Tails and wait for the computer to power off
2.529
And
I start Tails from USB drive "__internal" with network unplugged
32.771
And
I enable persistence
10.324
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.131
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.031
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.873
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
17.385
And
I start Tails from USB drive "__internal" with network unplugged
31.820
And
I enable persistence
10.433
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.279
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065