And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.471
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.949
And
I accept adding "cowsay" to Additional Software
4.052
And
Additional Software is correctly configured for package "cowsay"
0.543
And
I shutdown Tails and wait for the computer to power off
2.569
And
I start Tails from USB drive "__internal" with network unplugged
33.451
And
I enable persistence
12.021
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.453
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.036
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.913
And
I can open the Additional Software configuration window from the notification
2.465
And
I shutdown Tails and wait for the computer to power off
17.503
And
I start Tails from USB drive "__internal" with network unplugged
33.362
And
I enable persistence
11.078
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.612
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044