And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.692
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.149
And
I accept adding "cowsay" to Additional Software
3.992
And
Additional Software is correctly configured for package "cowsay"
0.478
And
I shutdown Tails and wait for the computer to power off
2.596
And
I start Tails from USB drive "__internal" with network unplugged
32.852
And
I enable persistence
10.727
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.894
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.037
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.865
And
I can open the Additional Software configuration window from the notification
2.438
And
I shutdown Tails and wait for the computer to power off
12.743
And
I start Tails from USB drive "__internal" with network unplugged
34.392
And
I enable persistence
11.660
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
7.718
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.127
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074