And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.628
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.408
And
I accept adding "cowsay" to Additional Software
4.790
And
Additional Software is correctly configured for package "cowsay"
0.596
And
I shutdown Tails and wait for the computer to power off
4.121
And
I start Tails from USB drive "__internal" with network unplugged
34.991
And
I enable persistence
12.213
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.184
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.028
And
available upgrades have been checked
1.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.329
And
I can open the Additional Software configuration window from the notification
2.635
And
I shutdown Tails and wait for the computer to power off
12.716
And
I start Tails from USB drive "__internal" with network unplugged
34.063
And
I enable persistence
11.507
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.150
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.413
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052