And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.095
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.422
And
I accept adding "cowsay" to Additional Software
2.323
And
Additional Software is correctly configured for package "cowsay"
0.533
And
I shutdown Tails and wait for the computer to power off
3.907
And
I start Tails from USB drive "__internal" with network unplugged
36.527
And
I enable persistence
12.557
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.034
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.455
And
I can open the Additional Software configuration window from the notification
2.430
And
I shutdown Tails and wait for the computer to power off
13.205
And
I start Tails from USB drive "__internal" with network unplugged
36.700
And
I enable persistence
12.597
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059