Project Number Date
test_Tails_ISO_21548-flatpak-install 15 22 May 2026, 17:33

Failures Overview

The following summary displays scenarios that failed.

Feature: System memory erasure on shutdown
Tags: @product @slow @not_release_blocker
3:23.883
Scenario Erasure of read and write disk caches of persistent data on shutdown
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.001
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 3:23.883
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/erase_memory.feature:76:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
When I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
When I trigger shutdown 0.000
Then I find very few patterns in the guest's memory after 20 seconds 0.000
After features/support/hooks.rb:335 5.047 
SCENARIO FAILED: 'Erasure of read and write disk caches of persistent data on shutdown' (at time 00:26:37)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:26:37_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:26:37_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:26:37_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:26:37_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.journal
After features/support/hooks.rb:104 0.009
Feature: Installing Tails to a USB drive
Tags: @product
31.924
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.001
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 31.924
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I create a file in the Persistent directory 0.000
And I temporarily create a 7200 MiB disk named "install" 0.000
And I create a gpt partition with a vfat filesystem on disk "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails with Persistent Storage to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:335 4.985 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 00:32:04)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:04_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:04_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:04_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:04_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:104 0.000
Feature: Installing Tails to a USB drive
Tags: @product
32.374
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.001
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 32.374
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:57:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:335 5.261 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 00:32:41)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:41_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:41_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:41_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:32:41_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:104 0.000
Feature: Installing Tails to a USB drive
Tags: @product
31.735
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.002
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 31.735
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:335 5.134 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 00:33:19)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:33:19_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:33:19_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:33:19_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:33:19_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:104 0.000
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
35.719
Scenario Upgrading an initial Tails installation with an incremental upgrade
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.719
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:82:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And no SquashFS delta is installed 0.000
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the file system changes introduced in version 6.2~testoverlayfs are not present 0.000
And the file system changes introduced in version 6.3~testoverlayfs are not present 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.2~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.2~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.2~testoverlayfs are present 0.000
And only the 6.2~testoverlayfs SquashFS delta is installed 0.000
# Our IUK sets a release date that can make Tor bootstrapping impossible
Given Tails system time is magically synchronized 0.000
# We'll really install Tails_amd64_6.0~testoverlayfs_to_6.3~testoverlayfs.iuk
# but we need some way to force upgrading a second time in a row
# even if only the initially installed version is considered
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.3~testoverlayfs 0.000
And I can successfully install the incremental upgrade to version 6.3~testoverlayfs 0.000
Given I shutdown Tails and wait for the computer to power off 0.000
When I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then Tails is running version 6.3~testoverlayfs 0.000
And all tps features are active 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present 0.000
And only the 6.3~testoverlayfs SquashFS delta is installed 0.000
# Regression test for #17425 (i.e. the Upgrader would propose
# upgrading to the version that's already running)
Given Tails system time is magically synchronized 0.000
And Tails is fooled to think that version 6.1~testoverlayfs was initially installed 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then the Upgrader considers the system as up-to-date 0.000
# Regression test on #8158 (i.e. the IUK's filesystem is not part of the Unsafe Browser's chroot)
And I successfully start the Unsafe Browser 0.000
And the file system changes introduced in version 6.3~testoverlayfs are present in the Unsafe Browser's chroot 0.000
After features/support/hooks.rb:335 4.898 
SCENARIO FAILED: 'Upgrading an initial Tails installation with an incremental upgrade' (at time 00:59:30)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:59:30_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:59:30_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:59:30_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/00:59:30_Upgrading_an_initial_Tails_installation_with_an_incremental_upgrade.journal
After features/support/hooks.rb:104 0.000
Feature: Upgrading an old Tails USB installation
Tags: @product @automatic_upgrade
34.691
Scenario Upgrading a Tails whose signing key is outdated
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.691
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_upgrade.feature:127:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And Tails is fooled to think that version 6.0~testoverlayfs was initially installed 0.000
And Tails is fooled to think it is running version 6.0~testoverlayfs 0.000
And the signing key used by the Upgrader is outdated 0.000
But a current signing key is available on our website 0.000
When the network is plugged 0.000
And Tor is ready 0.000
Then I am proposed to install an incremental upgrade to version 6.2~testoverlayfs 0.000
After features/support/hooks.rb:335 4.850 
SCENARIO FAILED: 'Upgrading a Tails whose signing key is outdated' (at time 01:00:09)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:00:09_Upgrading_a_Tails_whose_signing_key_is_outdated.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:00:09_Upgrading_a_Tails_whose_signing_key_is_outdated.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:00:09_Upgrading_a_Tails_whose_signing_key_is_outdated.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:00:09_Upgrading_a_Tails_whose_signing_key_is_outdated.journal
After features/support/hooks.rb:104 0.000
Feature: Emergency shutdown
Tags: @product @not_release_blocker
35.200
Scenario Tails erases memory and shuts down on USB boot medium removal: persistent data
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.200
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/emergency_shutdown.feature:48:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
And I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
And patterns cover at least 100 MiB in the guest's memory 0.000
When I eject the boot medium 0.000
And I wait for Tails to finish wiping the memory 0.000
Then I find very few patterns in the guest's memory 0.000
And Tails eventually shuts down 0.000
After features/support/hooks.rb:335 5.173 
SCENARIO FAILED: 'Tails erases memory and shuts down on USB boot medium removal: persistent data' (at time 01:03:54)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:03:54_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:03:54_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:03:54_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:03:54_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.journal
After features/support/hooks.rb:104 0.000
Feature: Backing up the persistent storage
Tags: @product
32.153
Scenario Using Tails' custom backup tool to backup a newly added file
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 32.153
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/backup.feature:8:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# The volume cannot be in use when GuestFs clones it, which we do below
And I shutdown Tails and wait for the computer to power off 0.000
And I clone USB drive "__internal" to a temporary USB drive "backup" 0.000
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 0.000
And I write a file "/live/persistence/TailsData_unlocked/new" with contents "foo" 0.000
When I start Tails' custom backup tool 0.000
Then the backup tool displays "Plug in your backup Tails USB stick" 0.000
When I plug USB drive "backup" 0.000
And I give the Persistent Storage on drive "backup" its own UUID 0.000
And I click "Retry" in the backup tool 0.000
Then the backup tool displays "Do you want to back up your Persistent Storage now?" 0.000
When I click "Back Up" in the backup tool 0.000
And I enter my persistent storage passphrase into the polkit prompt 0.000
Then the backup tool displays "Your Persistent Storage was backed up successfully to your backup Tails USB stick!" 0.000
# The backup tool ejects the drive, so we have to replug it
When I unplug USB drive "backup" 0.000
And I plug USB drive "backup" 0.000
Then the USB drive "backup" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:335 4.696 
SCENARIO FAILED: 'Using Tails' custom backup tool to backup a newly added file' (at time 01:05:08)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:05:08_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:05:08_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:05:08_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:05:08_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.journal
After features/support/hooks.rb:104 0.000
Feature: Using Evince
Tags: @product
35.059
Scenario I can view and print a PDF file stored in persistent /home/amnesia/Persistent
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.006
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.059
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:20:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/Persistent" as user "amnesia" 0.000
Then the file "/home/amnesia/Persistent/default-testpage.pdf" exists 0.000
When I open "/home/amnesia/Persistent/default-testpage.pdf" with Evince 0.000
Then I see "CupsTestPage.png" after at most 40 seconds 0.000
And I can print the current document to "/home/amnesia/Persistent/output.pdf" 0.000
After features/support/hooks.rb:335 4.899 
SCENARIO FAILED: 'I can view and print a PDF file stored in persistent /home/amnesia/Persistent' (at time 01:09:00)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:09:00_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:09:00_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:09:00_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:09:00_I_can_view_and_print_a_PDF_file_stored_in_persistent__home_amnesia_Persistent.journal
After features/support/hooks.rb:104 0.000
Feature: GNOME is well-integrated into Tails
Tags: @product
34.203
Scenario I can launch various apps via GNOME Activities Overview
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
# Some apps (Electrum and Persistent Storage Backup) only start when
# a Persistent Storage is available.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.203
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/gnome.feature:22:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Some apps (Tor Browser) only start when the network is plugged.
And the network is plugged 0.000
And Tor is ready 0.000
And all notifications have disappeared 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I close the "tails-additional-software-config" window 0.000
When I start "Disks" via GNOME Activities Overview 0.000
# The close button of GNOME Disks is not accessible
And I close the "gnome-disks" window via Alt+F4 0.000
When I start "Console" via GNOME Activities Overview 0.000
And I close Console 0.000
When I start "Files" via GNOME Activities Overview 0.000
And I close the "org.gnome.Nautilus" window 0.000
When I start "Persistent Storage" via GNOME Activities Overview 0.000
And I close the "tps-frontend" window 0.000
When I start "Back Up Persistent Storage" via GNOME Activities Overview 0.000
And I close the "zenity" window 0.000
When I start "Pidgin" via GNOME Activities Overview 0.000
And I close the "Pidgin" window via Alt+F4 0.000
When I start "Thunderbird" via GNOME Activities Overview 0.000
And I click "Learn More" in the "Install Thunderbird" zenity dialog 0.000
And I close the "Firefox" window 0.000
When I start "Tor Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
When I start "Unlock VeraCrypt Volumes" via GNOME Activities Overview 0.000
And I close the "unlock-veracrypt-volumes" window 0.000
When I start "Unsafe Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
When I start "Secrets" via GNOME Activities Overview 0.000
And I close the "secrets" window 0.000
After features/support/hooks.rb:335 5.130 
SCENARIO FAILED: 'I can launch various apps via GNOME Activities Overview' (at time 01:10:08)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:10:08_I_can_launch_various_apps_via_GNOME_Activities_Overview.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:10:08_I_can_launch_various_apps_via_GNOME_Activities_Overview.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:10:08_I_can_launch_various_apps_via_GNOME_Activities_Overview.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:10:08_I_can_launch_various_apps_via_GNOME_Activities_Overview.journal
After features/support/hooks.rb:104 0.000
Feature: Hardware failures
Tags: @product @doc
33.632
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.004
Steps
Given a computer 0.062
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 33.569
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:29:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:23:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the SquashFS 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:335 5.050 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#1)' (at time 01:12:18)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:18_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:18_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:18_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:18_Alerting_about_disk_read_failures_in_GNOME,_Examples___1_.journal
After features/support/hooks.rb:104 0.000
Feature: Hardware failures
Tags: @product @doc
32.833
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.006
Steps
Given a computer 0.120
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 32.712
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:30:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:23:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:335 5.056 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#2)' (at time 01:12:56)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:56_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:56_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:56_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:12:56_Alerting_about_disk_read_failures_in_GNOME,_Examples___2_.journal
After features/support/hooks.rb:104 0.000
Feature: Hardware failures
Tags: @product @doc
34.979
Scenario Outline Alerting about disk read failures in GNOME
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.005
Steps
Given a computer 0.068
And I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.910
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/hardware_failure.feature:31:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
features/hardware_failure.feature:23:in `And I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When Tails detects disk read failures on the boot device with a target error 0.000
Then I see a disk failure message 0.000
Then I can open the hardware failure documentation from the disk failure message 0.000
After features/support/hooks.rb:335 4.877 
SCENARIO FAILED: 'Alerting about disk read failures in GNOME, Examples (#3)' (at time 01:13:36)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:13:36_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:13:36_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:13:36_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:13:36_Alerting_about_disk_read_failures_in_GNOME,_Examples___3_.journal
After features/support/hooks.rb:104 0.000
Feature: Localization
Tags: @product
27.673
Scenario Tails stores localization preferences when it's asked to
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.017
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 8.994
When I set the language to Italian (it) 4.710
And I save the language and keyboard options in cleartext storage 13.968
The 
The Dogtail init script raised: SearchError: descendant of [application | Welcome to Tails!]: child with name='Question' roleName='alert'
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/common_steps.rb:509:in `/^I save the language and keyboard options in cleartext storage$/'
features/localization.feature:71:in `And I save the language and keyboard options in cleartext storage'
Then the "it" language and keyboard have been saved in cleartext storage 0.000
When I set the language to French (fr) 0.000
Then the "fr" language and keyboard have been saved in cleartext storage 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
Then the "fr" language and keyboard have been saved in cleartext storage 0.000
And the Welcome Screen's language is set to French 0.000
When I log in to a new session 0.000
Then the language is set to French 0.000
After features/support/hooks.rb:335 5.146 
SCENARIO FAILED: 'Tails stores localization preferences when it's asked to' (at time 01:54:33)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:54:33_Tails_stores_localization_preferences_when_it_s_asked_to.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:54:33_Tails_stores_localization_preferences_when_it_s_asked_to.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:54:33_Tails_stores_localization_preferences_when_it_s_asked_to.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/01:54:33_Tails_stores_localization_preferences_when_it_s_asked_to.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
34.027
Scenario Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.027
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:42:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then Tails is running from USB drive "__internal" 0.000
And all tps features are active 0.000
And all persistent directories have safe access rights 0.000
When I disable the first tps feature 0.000
Then all tps features but the first one are active 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then all tps features but the first one are active 0.000
After features/support/hooks.rb:335 5.073 
SCENARIO FAILED: 'Booting Tails from a USB drive with an enabled persistent partition and reconfiguring it' (at time 02:08:52)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:08:52_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:08:52_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:08:52_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:08:52_Booting_Tails_from_a_USB_drive_with_an_enabled_persistent_partition_and_reconfiguring_it.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
34.922
Scenario Activating and deactivating Persistent Storage features
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.922
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:53:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
And I create a file in the Persistent directory 0.000
Then the file I created was copied to the Persistent Storage 0.000
When I disable the first tps feature 0.000
Then persistence for "Persistent" is not active 0.000
And the Persistent directory does not exist 0.000
When I enable the first tps feature 0.000
Then persistence for "Persistent" is active 0.000
And the file I created in the Persistent directory exists 0.000
After features/support/hooks.rb:335 5.227 
SCENARIO FAILED: 'Activating and deactivating Persistent Storage features' (at time 02:09:32)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:09:32_Activating_and_deactivating_Persistent_Storage_features.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:09:32_Activating_and_deactivating_Persistent_Storage_features.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:09:32_Activating_and_deactivating_Persistent_Storage_features.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:09:32_Activating_and_deactivating_Persistent_Storage_features.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
33.444
Scenario Deleting data of a Persistent Storage feature
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 33.444
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:65:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then persistence for "Persistent" is active 0.000
When I create a file in the Persistent directory 0.000
And I disable the first tps feature 0.000
And I delete the data of the Persistent Folder feature 0.000
Then the file I created does not exist on the Persistent Storage 0.000
After features/support/hooks.rb:335 4.987 
SCENARIO FAILED: 'Deleting data of a Persistent Storage feature' (at time 02:10:11)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:11_Deleting_data_of_a_Persistent_Storage_feature.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:11_Deleting_data_of_a_Persistent_Storage_feature.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:11_Deleting_data_of_a_Persistent_Storage_feature.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:11_Deleting_data_of_a_Persistent_Storage_feature.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
35.387
Scenario Writing files to a read/write-enabled persistent partition
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.387
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:73:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I take note of which tps features are available 0.000
When I write some files expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
# XXX: The next step succeeds (and the --debug output confirms that it's actually looking for the files) but will fail in a subsequent scenario restoring the same snapshot. This exactly what we want, but why does it work? What is guestfs's behaviour when qcow2 internal snapshots are involved? (tails/tails#10330)
Then only the expected files are present on the persistence partition on USB drive "__internal" 0.000
After features/support/hooks.rb:335 5.242 
SCENARIO FAILED: 'Writing files to a read/write-enabled persistent partition' (at time 02:10:51)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:51_Writing_files_to_a_read_write-enabled_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:51_Writing_files_to_a_read_write-enabled_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:51_Writing_files_to_a_read_write-enabled_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:10:51_Writing_files_to_a_read_write-enabled_persistent_partition.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
34.583
Scenario Creating and using a persistent NetworkManager connection
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 34.583
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:83:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And Tor is ready 0.000
And I add a wired DHCP NetworkManager connection called "persistent-con-current" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Given I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
And I capture all network traffic 0.000
And the network is plugged 0.000
And Tor is ready 0.000
And I switch to the "persistent-con-current" NetworkManager connection 0.000
And the 1st network device has a spoofed MAC address configured 0.000
And no network device leaked the real MAC address 0.000
After features/support/hooks.rb:335 5.140 
SCENARIO FAILED: 'Creating and using a persistent NetworkManager connection' (at time 02:11:31)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:11:31_Creating_and_using_a_persistent_NetworkManager_connection.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:11:31_Creating_and_using_a_persistent_NetworkManager_connection.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:11:31_Creating_and_using_a_persistent_NetworkManager_connection.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:11:31_Creating_and_using_a_persistent_NetworkManager_connection.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
33.105
Scenario Changing the Persistent Storage passphrase
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.005
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 33.105
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:124:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Note that if anything fails after the passphrase was changed and
# before it's changed back below, subsequent scenarios might fail
# because the Persistent Storage doesn't have the expected passphrase.
When I change the passphrase of the Persistent Storage 0.000
And I shutdown Tails and wait for the computer to power off 0.000
Then I start Tails from USB drive "__internal" with network unplugged and I login with the changed persistence passphrase 0.000
And I change the passphrase of the Persistent Storage back to the original 0.000
After features/support/hooks.rb:335 4.826 
SCENARIO FAILED: 'Changing the Persistent Storage passphrase' (at time 02:15:47)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:15:47_Changing_the_Persistent_Storage_passphrase.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:15:47_Changing_the_Persistent_Storage_passphrase.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:15:47_Changing_the_Persistent_Storage_passphrase.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:15:47_Changing_the_Persistent_Storage_passphrase.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
35.678
Scenario Dotfiles persistence
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.678
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/persistence.feature:143:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
When I write some dotfile expected to persist 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged and I login with persistence enabled 0.000
Then the expected persistent dotfile is present in the filesystem 0.000
After features/support/hooks.rb:335 4.802 
SCENARIO FAILED: 'Dotfiles persistence' (at time 02:17:08)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:08_Dotfiles_persistence.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:08_Dotfiles_persistence.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:08_Dotfiles_persistence.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:08_Dotfiles_persistence.journal
After features/support/hooks.rb:104 0.000
Feature: Tails persistence
Tags: @product
42.526
Scenario Feature activation fails
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition and stopped at Tails Greeter's login screen 7.837
And I create a symlink "/home/amnesia/Persistent" to "/etc" 0.062
When I try to enable persistence 1.215
Then the Welcome Screen tells me that the Persistent Folder feature couldn't be activated 11.734
When I log in to a new session after having activated the Persistent Storage 10.159
And all notifications have disappeared 8.707
Then the Persistent Storage settings tell me that the Persistent Folder feature couldn't be activated 1.419
And all tps features are enabled 1.388
Feature 
Feature 'Flatpak' is not enabled.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:806:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:801:in `each'
./features/step_definitions/usb.rb:801:in `/^all tps features(| but the first one) are enabled$/'
features/persistence.feature:157:in `And all tps features are enabled'
And all tps features but the first one are active 0.000
After features/support/hooks.rb:335 4.873 
SCENARIO FAILED: 'Feature activation fails' (at time 02:17:56)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:56_Feature_activation_fails.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:56_Feature_activation_fails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:56_Feature_activation_fails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:17:56_Feature_activation_fails.journal
After features/support/hooks.rb:104 0.000
Feature: Tails has a sane default configuration
Tags: @product
35.186
Scenario No unexpected error messages in the journal after booting from USB drive
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.004
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.186
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/sane_defaults.feature:25:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
Then there are no unexpected messages of priority "err" or higher in the journal 0.000
After features/support/hooks.rb:335 4.784 
SCENARIO FAILED: 'No unexpected error messages in the journal after booting from USB drive' (at time 02:29:28)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:29:28_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:29:28_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:29:28_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:29:28_No_unexpected_error_messages_in_the_journal_after_booting_from_USB_drive.journal
After features/support/hooks.rb:104 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
1:23.652
Scenario The Tor Browser cannot access the LAN
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.021
Steps
Given I have started Tails from DVD and logged in and the network is connected 10.097
And a web server is running on the LAN 1.029
And I capture all network traffic 0.004
When I start the Tor Browser 8.295
And I open a page on the LAN web server in the Tor Browser 4.225
Then the Tor Browser shows the "Unable to connect" error 1:0.000
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/browser.rb:383:in `/^the (Tor|Unsafe) Browser shows the "([^"]+)" error$/'
features/torified_browsing.feature:13:in `Then the Tor Browser shows the "Unable to connect" error'
And no traffic was sent to the web server on the LAN 0.000
After features/support/hooks.rb:335 5.324 
SCENARIO FAILED: 'The Tor Browser cannot access the LAN' (at time 02:44:37)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:44:37_The_Tor_Browser_cannot_access_the_LAN.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:44:37_The_Tor_Browser_cannot_access_the_LAN.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:44:37_The_Tor_Browser_cannot_access_the_LAN.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:44:37_The_Tor_Browser_cannot_access_the_LAN.journal
After features/support/hooks.rb:104 0.056
Feature: Browsing the web using the Tor Browser
Tags: @product
35.124
Scenario The Persistent directory is usable in Tor Browser
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.007
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.124
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:102:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And the network is plugged 0.000
And I successfully configure Tor 0.000
And available upgrades have been checked 0.000
And all notifications have disappeared 0.000
And there is a GNOME bookmark for the Persistent directory 0.000
When I start the Tor Browser 0.000
And I download some file in the Tor Browser to the Persistent directory 0.000
Then the file is saved to the Persistent directory 0.000
When I open the address "https://tails.net/about" in the Tor Browser 0.000
Then "Tails - How Tails works" has loaded in the Tor Browser 0.000
And I can print the current page as "output.pdf" to the Persistent directory 0.000
After features/support/hooks.rb:335 4.823 
SCENARIO FAILED: 'The Persistent directory is usable in Tor Browser' (at time 02:50:55)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:50:55_The_Persistent_directory_is_usable_in_Tor_Browser.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:50:55_The_Persistent_directory_is_usable_in_Tor_Browser.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:50:55_The_Persistent_directory_is_usable_in_Tor_Browser.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:50:55_The_Persistent_directory_is_usable_in_Tor_Browser.journal
After features/support/hooks.rb:104 0.000
Feature: Browsing the web using the Tor Browser
Tags: @product
32.986
Scenario Persistent browser bookmarks
Before features/support/hooks.rb:270 0.000
Before features/support/hooks.rb:277 0.007
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 32.986
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/torified_browsing.feature:130:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And all tps features are active 0.000
And all persistent filesystems have safe access rights 0.000
And all persistence configuration files have safe access rights 0.000
And all persistent directories have safe access rights 0.000
When I start the Tor Browser in offline mode 0.000
And I add a bookmark to eff.org in the Tor Browser 0.000
And I cold reboot the computer 0.000
And the computer reboots Tails 0.000
And I enable persistence 0.000
And I log in to a new session 0.000
And all notifications have disappeared 0.000
And I start the Tor Browser in offline mode 0.000
Then the Tor Browser has a bookmark to eff.org 0.000
After features/support/hooks.rb:335 5.013 
SCENARIO FAILED: 'Persistent browser bookmarks' (at time 02:55:07)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:55:07_Persistent_browser_bookmarks.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:55:07_Persistent_browser_bookmarks.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:55:07_Persistent_browser_bookmarks.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:55:07_Persistent_browser_bookmarks.journal
After features/support/hooks.rb:104 0.000
Feature: Using Totem
Tags: @product
35.129
Scenario Watching MP4 videos stored in the Persistent Storage
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 35.129
Feature 
Feature 'Flatpak' is not active.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/step_definitions/usb.rb:793:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:788:in `each'
./features/step_definitions/usb.rb:788:in `/^all tps features(| from the old Tails version)(| but the first one) are active$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/totem.feature:24:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I plug and mount a USB drive containing sample videos 0.000
And I copy the sample videos to "/home/amnesia/Persistent" as user "amnesia" 0.000
When I open "/home/amnesia/Persistent/video.mp4" with Totem 0.000
Then I see "SampleLocalMp4VideoFrame.png" after at most 40 seconds 0.000
After features/support/hooks.rb:335 5.096 
SCENARIO FAILED: 'Watching MP4 videos stored in the Persistent Storage' (at time 02:57:56)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:57:56_Watching_MP4_videos_stored_in_the_Persistent_Storage.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:57:56_Watching_MP4_videos_stored_in_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:57:56_Watching_MP4_videos_stored_in_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_21548-flatpak-install/15/artifact/build-artifacts/02:57:56_Watching_MP4_videos_stored_in_the_Persistent_Storage.journal
After features/support/hooks.rb:104 0.000