And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.916
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.285
And
I accept adding "cowsay" to Additional Software
3.741
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
8.164
And
I start Tails from USB drive "__internal" with network unplugged
37.413
And
I enable persistence
6.381
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
10.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.014
And
available upgrades have been checked
1.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.495
And
I can open the Additional Software configuration window from the notification
2.554
And
I shutdown Tails and wait for the computer to power off
13.331
And
I start Tails from USB drive "__internal" with network unplugged
37.430
And
I enable persistence
6.834
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.342
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.503
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082