And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.185
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.809
And
I accept adding "cowsay" to Additional Software
3.685
And
Additional Software is correctly configured for package "cowsay"
0.579
And
I shutdown Tails and wait for the computer to power off
7.939
And
I start Tails from USB drive "__internal" with network unplugged
35.269
And
I enable persistence
5.558
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.496
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.023
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.411
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
13.476
And
I start Tails from USB drive "__internal" with network unplugged
35.884
And
I enable persistence
5.444
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060