And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.363
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.345
And
I accept adding "cowsay" to Additional Software
3.664
And
Additional Software is correctly configured for package "cowsay"
0.687
And
I shutdown Tails and wait for the computer to power off
7.928
And
I start Tails from USB drive "__internal" with network unplugged
36.269
And
I enable persistence
5.502
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.115
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.014
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.399
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
17.100
And
I start Tails from USB drive "__internal" with network unplugged
37.070
And
I enable persistence
5.576
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.188
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.525
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056