And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.640
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.287
And
I accept adding "cowsay" to Additional Software
3.621
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
7.968
And
I start Tails from USB drive "__internal" with network unplugged
35.821
And
I enable persistence
5.344
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
10.272
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
1.117
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.499
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
16.919
And
I start Tails from USB drive "__internal" with network unplugged
35.959
And
I enable persistence
5.183
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.853
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060