And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:44.788
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.512
And
I accept adding "cowsay" to Additional Software
3.728
And
Additional Software is correctly configured for package "cowsay"
0.569
And
I shutdown Tails and wait for the computer to power off
4.136
And
I start Tails from USB drive "__internal" with network unplugged
37.030
And
I enable persistence
5.743
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.304
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.015
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.982
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
17.135
And
I start Tails from USB drive "__internal" with network unplugged
36.599
And
I enable persistence
5.874
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.656
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053