And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.654
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.460
And
I accept adding "cowsay" to Additional Software
3.675
And
Additional Software is correctly configured for package "cowsay"
0.578
And
I shutdown Tails and wait for the computer to power off
4.316
And
I start Tails from USB drive "__internal" with network unplugged
34.912
And
I enable persistence
5.679
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.534
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
22.339
And
I start Tails from USB drive "__internal" with network unplugged
35.371
And
I enable persistence
5.413
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.173
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052