And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.992
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.885
And
I accept adding "cowsay" to Additional Software
3.661
And
Additional Software is correctly configured for package "cowsay"
0.569
And
I shutdown Tails and wait for the computer to power off
8.045
And
I start Tails from USB drive "__internal" with network unplugged
36.166
And
I enable persistence
6.355
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.249
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.017
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.525
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
13.129
And
I start Tails from USB drive "__internal" with network unplugged
36.523
And
I enable persistence
5.385
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062