And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.500
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.368
And
I accept adding "cowsay" to Additional Software
3.598
And
Additional Software is correctly configured for package "cowsay"
0.579
And
I shutdown Tails and wait for the computer to power off
2.713
And
I start Tails from USB drive "__internal" with network unplugged
35.733
And
I enable persistence
8.934
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.385
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.017
And
available upgrades have been checked
3.206
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.390
And
I can open the Additional Software configuration window from the notification
2.515
And
I shutdown Tails and wait for the computer to power off
18.483
And
I start Tails from USB drive "__internal" with network unplugged
35.700
And
I enable persistence
9.014
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.341
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063