And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.952
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.042
And
I accept adding "cowsay" to Additional Software
4.863
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
4.061
And
I start Tails from USB drive "__internal" with network unplugged
36.632
And
I enable persistence
9.271
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.510
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.017
And
available upgrades have been checked
2.236
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.453
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
17.309
And
I start Tails from USB drive "__internal" with network unplugged
36.330
And
I enable persistence
9.264
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072