And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.970
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.927
And
I accept adding "cowsay" to Additional Software
4.968
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
2.717
And
I start Tails from USB drive "__internal" with network unplugged
35.356
And
I enable persistence
12.000
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
7.988
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.034
And
available upgrades have been checked
0.030
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.857
And
I can open the Additional Software configuration window from the notification
2.379
And
I shutdown Tails and wait for the computer to power off
17.991
And
I start Tails from USB drive "__internal" with network unplugged
35.039
And
I enable persistence
13.748
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
9.198
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064