And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.359
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.702
And
I accept adding "cowsay" to Additional Software
3.553
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
7.926
And
I start Tails from USB drive "__internal" with network unplugged
35.104
And
I enable persistence
6.342
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.215
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
2.205
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.475
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
22.401
And
I start Tails from USB drive "__internal" with network unplugged
35.962
And
I enable persistence
5.739
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.503
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083