And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.309
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.702
And
I accept adding "cowsay" to Additional Software
3.575
And
Additional Software is correctly configured for package "cowsay"
0.631
And
I shutdown Tails and wait for the computer to power off
4.234
And
I start Tails from USB drive "__internal" with network unplugged
37.602
And
I enable persistence
7.147
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.093
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.546
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.016
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.034
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
13.362
And
I start Tails from USB drive "__internal" with network unplugged
38.047
And
I enable persistence
6.753
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.508
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092