And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.091
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.777
And
I accept adding "cowsay" to Additional Software
3.797
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
7.849
And
I start Tails from USB drive "__internal" with network unplugged
35.151
And
I enable persistence
6.310
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
10.114
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.015
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.456
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
18.359
And
I start Tails from USB drive "__internal" with network unplugged
35.666
And
I enable persistence
6.413
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.312
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.454
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060