And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.924
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.169
And
I accept adding "cowsay" to Additional Software
4.984
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
8.055
And
I start Tails from USB drive "__internal" with network unplugged
38.526
And
I enable persistence
6.885
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.553
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.025
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.132
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
17.322
And
I start Tails from USB drive "__internal" with network unplugged
37.882
And
I enable persistence
7.118
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.139
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.121