And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.595
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.127
And
I accept adding "cowsay" to Additional Software
3.725
And
Additional Software is correctly configured for package "cowsay"
0.620
And
I shutdown Tails and wait for the computer to power off
4.249
And
I start Tails from USB drive "__internal" with network unplugged
37.035
And
I enable persistence
9.905
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.376
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.015
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.538
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
13.290
And
I start Tails from USB drive "__internal" with network unplugged
36.221
And
I enable persistence
8.724
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.309
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059