And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.327
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.591
And
I accept adding "cowsay" to Additional Software
4.795
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
3.917
And
I start Tails from USB drive "__internal" with network unplugged
35.814
And
I enable persistence
8.340
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.227
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.015
And
available upgrades have been checked
2.162
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.970
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
13.265
And
I start Tails from USB drive "__internal" with network unplugged
36.442
And
I enable persistence
8.485
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.608
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065