And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.301
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.861
And
I accept adding "cowsay" to Additional Software
3.667
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
4.014
And
I start Tails from USB drive "__internal" with network unplugged
37.336
And
I enable persistence
9.048
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.251
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.018
And
available upgrades have been checked
2.177
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.507
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
18.735
And
I start Tails from USB drive "__internal" with network unplugged
37.995
And
I enable persistence
9.228
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.839
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063