And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:10.281
And
I configure APT to prefer an old version of cowsay
0.242
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
36.310
And
I accept adding "cowsay" to Additional Software
10.600
And
Additional Software is correctly configured for package "cowsay"
2.082
And
I shutdown Tails and wait for the computer to power off
6.729
And
I start Tails from USB drive "__internal" with network unplugged
1:35.969
And
I enable persistence
17.594
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
47.365
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
52.422
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.103
And
the network is plugged
0.075
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.457
And
I can open the Additional Software configuration window from the notification
7.365
And
I shutdown Tails and wait for the computer to power off
20.099
And
I start Tails from USB drive "__internal" with network unplugged
1:23.895
And
I enable persistence
18.385
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
1:0.352
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.703
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.965
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.398