And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.244
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.269
And
I accept adding "cowsay" to Additional Software
3.944
And
Additional Software is correctly configured for package "cowsay"
0.561
And
I shutdown Tails and wait for the computer to power off
5.061
And
I start Tails from USB drive "__internal" with network unplugged
32.953
And
I enable persistence
10.544
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.504
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.021
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.035
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.224
And
I can open the Additional Software configuration window from the notification
2.646
And
I shutdown Tails and wait for the computer to power off
2.634
And
I start Tails from USB drive "__internal" with network unplugged
32.753
And
I enable persistence
10.707
And
I configure APT to prefer an old version of cowsay
0.003
And
I log in to a new session
7.401
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047