And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.862
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.496
And
I accept adding "cowsay" to Additional Software
7.316
And
Additional Software is correctly configured for package "cowsay"
1.088
And
I shutdown Tails and wait for the computer to power off
6.361
And
I start Tails from USB drive "__internal" with network unplugged
1:3.765
And
I enable persistence
13.013
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
43.800
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.859
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.073
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.504
And
I can open the Additional Software configuration window from the notification
3.285
And
I shutdown Tails and wait for the computer to power off
14.722
And
I start Tails from USB drive "__internal" with network unplugged
1:3.466
And
I enable persistence
13.981
And
I configure APT to prefer an old version of cowsay
0.079
And
I log in to a new session
42.883
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.227
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.135