And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.406
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.579
And
I accept adding "cowsay" to Additional Software
6.961
And
Additional Software is correctly configured for package "cowsay"
1.080
And
I shutdown Tails and wait for the computer to power off
6.364
And
I start Tails from USB drive "__internal" with network unplugged
1:1.512
And
I enable persistence
13.323
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
40.910
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.493
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.215
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.399
And
I can open the Additional Software configuration window from the notification
3.261
And
I shutdown Tails and wait for the computer to power off
13.294
And
I start Tails from USB drive "__internal" with network unplugged
1:2.458
And
I enable persistence
12.547
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.674
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.972
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.103
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.117