And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.053
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.858
And
I accept adding "cowsay" to Additional Software
4.353
And
Additional Software is correctly configured for package "cowsay"
0.926
And
I shutdown Tails and wait for the computer to power off
6.513
And
I start Tails from USB drive "__internal" with network unplugged
1:1.442
And
I enable persistence
15.216
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
40.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.956
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.075
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.330
And
I can open the Additional Software configuration window from the notification
3.611
And
I shutdown Tails and wait for the computer to power off
2:8.539
And
I start Tails from USB drive "__internal" with network unplugged
1:3.790
And
I enable persistence
12.903
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
41.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.349
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.311
Then
the Additional Software upgrade service has started
0.226
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100