And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.233
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.099
And
I accept adding "cowsay" to Additional Software
4.763
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
6.395
And
I start Tails from USB drive "__internal" with network unplugged
1:3.329
And
I enable persistence
14.766
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.113
And
I log in to a new session
42.368
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.069
And
available upgrades have been checked
2.608
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.721
And
I can open the Additional Software configuration window from the notification
3.158
And
I shutdown Tails and wait for the computer to power off
14.723
And
I start Tails from USB drive "__internal" with network unplugged
1:0.833
And
I enable persistence
13.315
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
41.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.226
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109