And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:1.785
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.639
And
I accept adding "cowsay" to Additional Software
6.720
And
Additional Software is correctly configured for package "cowsay"
0.996
And
I shutdown Tails and wait for the computer to power off
6.387
And
I start Tails from USB drive "__internal" with network unplugged
1:0.661
And
I enable persistence
13.482
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
44.334
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.641
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.076
And
available upgrades have been checked
1.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.817
And
I can open the Additional Software configuration window from the notification
3.200
And
I shutdown Tails and wait for the computer to power off
19.070
And
I start Tails from USB drive "__internal" with network unplugged
1:3.649
And
I enable persistence
16.356
And
I configure APT to prefer an old version of cowsay
0.046
And
I log in to a new session
49.839
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.627
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.104
And
the network is plugged
0.150
Then
the Additional Software upgrade service has started
0.240
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.120