And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.667
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.810
And
I accept adding "cowsay" to Additional Software
4.987
And
Additional Software is correctly configured for package "cowsay"
0.933
And
I shutdown Tails and wait for the computer to power off
6.688
And
I start Tails from USB drive "__internal" with network unplugged
1:0.840
And
I enable persistence
14.901
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
45.317
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.387
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.096
And
available upgrades have been checked
1.761
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.901
And
I can open the Additional Software configuration window from the notification
2.440
And
I shutdown Tails and wait for the computer to power off
2:7.489
And
I start Tails from USB drive "__internal" with network unplugged
1:9.513
And
I enable persistence
15.529
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
50.117
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.816
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.572
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108