And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.178
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.878
And
I accept adding "cowsay" to Additional Software
5.398
And
Additional Software is correctly configured for package "cowsay"
0.976
And
I shutdown Tails and wait for the computer to power off
4.643
And
I start Tails from USB drive "__internal" with network unplugged
1:3.271
And
I enable persistence
13.625
And
I configure APT to prefer an old version of cowsay
0.053
And
I disable the tails-virt-notify-user.service user unit
0.123
And
I log in to a new session
41.322
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.749
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.115
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.846
And
I can open the Additional Software configuration window from the notification
4.625
And
I shutdown Tails and wait for the computer to power off
19.805
And
I start Tails from USB drive "__internal" with network unplugged
1:3.353
And
I enable persistence
13.195
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
46.356
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.457
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091