And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.332
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.700
And
I accept adding "cowsay" to Additional Software
7.205
And
Additional Software is correctly configured for package "cowsay"
0.990
And
I shutdown Tails and wait for the computer to power off
6.160
And
I start Tails from USB drive "__internal" with network unplugged
1:5.096
And
I enable persistence
13.803
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.135
And
I log in to a new session
42.518
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.309
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.254
And
available upgrades have been checked
1.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.447
And
I can open the Additional Software configuration window from the notification
2.876
And
I shutdown Tails and wait for the computer to power off
2:3.345
And
I start Tails from USB drive "__internal" with network unplugged
1:2.979
And
I enable persistence
14.870
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
41.423
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.566
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.219
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.122