And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.307
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.060
And
I accept adding "cowsay" to Additional Software
5.776
And
Additional Software is correctly configured for package "cowsay"
1.109
And
I shutdown Tails and wait for the computer to power off
6.906
And
I start Tails from USB drive "__internal" with network unplugged
1:10.344
And
I enable persistence
16.281
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
47.256
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.937
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.104
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.979
And
I can open the Additional Software configuration window from the notification
2.485
And
I shutdown Tails and wait for the computer to power off
12.596
And
I start Tails from USB drive "__internal" with network unplugged
1:3.990
And
I enable persistence
14.075
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
39.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.465
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098