And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:41.571
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.629
And
I accept adding "cowsay" to Additional Software
5.743
And
Additional Software is correctly configured for package "cowsay"
1.089
And
I shutdown Tails and wait for the computer to power off
7.257
And
I start Tails from USB drive "__internal" with network unplugged
1:7.447
And
I enable persistence
16.475
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.122
And
I log in to a new session
51.233
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.771
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.084
And
available upgrades have been checked
1.189
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.129
And
I can open the Additional Software configuration window from the notification
2.803
And
I shutdown Tails and wait for the computer to power off
19.286
And
I start Tails from USB drive "__internal" with network unplugged
1:5.957
And
I enable persistence
14.551
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
46.346
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.662
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.641
Then
the Additional Software upgrade service has started
0.211
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107