And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.848
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.014
And
I accept adding "cowsay" to Additional Software
7.946
And
Additional Software is correctly configured for package "cowsay"
1.026
And
I shutdown Tails and wait for the computer to power off
6.828
And
I start Tails from USB drive "__internal" with network unplugged
1:4.552
And
I enable persistence
13.169
And
I configure APT to prefer an old version of cowsay
0.040
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
41.255
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.092
And
available upgrades have been checked
2.420
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.723
And
I can open the Additional Software configuration window from the notification
3.700
And
I shutdown Tails and wait for the computer to power off
2:2.882
And
I start Tails from USB drive "__internal" with network unplugged
1:4.602
And
I enable persistence
15.161
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
43.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.863
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.218
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112