And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:57.525
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.746
And
I accept adding "cowsay" to Additional Software
4.361
And
Additional Software is correctly configured for package "cowsay"
1.797
And
I shutdown Tails and wait for the computer to power off
6.523
And
I start Tails from USB drive "__internal" with network unplugged
1:1.957
And
I enable persistence
12.463
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
41.220
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.719
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.072
And
available upgrades have been checked
0.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.860
And
I can open the Additional Software configuration window from the notification
3.482
And
I shutdown Tails and wait for the computer to power off
13.258
And
I start Tails from USB drive "__internal" with network unplugged
1:0.812
And
I enable persistence
13.896
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
43.556
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.510
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.165
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.116