And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.023
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.409
And
I accept adding "cowsay" to Additional Software
5.437
And
Additional Software is correctly configured for package "cowsay"
0.923
And
I shutdown Tails and wait for the computer to power off
4.499
And
I start Tails from USB drive "__internal" with network unplugged
58.906
And
I enable persistence
12.621
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
38.821
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.109
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.278
And
I can open the Additional Software configuration window from the notification
2.764
And
I shutdown Tails and wait for the computer to power off
13.751
And
I start Tails from USB drive "__internal" with network unplugged
59.648
And
I enable persistence
14.195
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
33.117
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089