Project Number Date
test_Tails_ISO_20531-early-reporting-of-bad-devices 24 17 Dec 2024, 23:47

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 71 1 3 0 0 75 9 1 10 20:25.610 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
26.767
Before features/support/hooks.rb:269 0.004
Given I have started Tails from DVD without network and logged in 8.212
And I temporarily create a 4 GiB disk named "gptfat" 0.046
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.279
And I plug USB drive "gptfat" 2.485
When I start Tails Installer 9.677
Then I am told by Tails Installer that the destination device "is too small" 0.065
After features/support/hooks.rb:326 0.874
After features/support/hooks.rb:100 0.001
Tags: @product
22.315
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 9.246
And I temporarily create a 7200 MiB disk named "temp" 0.041
And I start Tails Installer 9.693
But a suitable USB device is not found 0.029
When I plug USB drive "temp" 2.940
Then the "temp" USB drive is selected 0.136
When I unplug USB drive "temp" 0.200
Then a suitable USB device is not found 0.026
After features/support/hooks.rb:326 2.016
After features/support/hooks.rb:100 0.000
Tags: @product
2:32.190
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.151
And I temporarily create a 7200 MiB disk named "install" 0.054
And I create a gpt partition with a vfat filesystem on disk "install" 6.450
And I plug USB drive "install" 2.570
And I install Tails to USB drive "install" by cloning 1:55.963
Then the running Tails is installed on USB drive "install" 12.931
And there is a random seed on USB drive "install" 5.999
But there is no persistence partition on USB drive "install" 0.069
After features/support/hooks.rb:326 1.196
After features/support/hooks.rb:100 0.134
Tags: @product
2:19.231
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.992
And I temporarily create a 7200 MiB disk named "install" 0.047
And I plug USB drive "install" 2.642
And I install Tails to USB drive "install" by cloning 1:43.408
Then the running Tails is installed on USB drive "install" 17.930
And there is a random seed on USB drive "install" 6.104
But there is no persistence partition on USB drive "install" 0.104
After features/support/hooks.rb:326 1.519
After features/support/hooks.rb:100 0.144
Tags: @product
3:1.343
Before features/support/hooks.rb:269 0.002
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.539
And I create a file in the Persistent directory 0.113
And I temporarily create a 7200 MiB disk named "install" 0.061
And I create a gpt partition with a vfat filesystem on disk "install" 6.550
And I plug USB drive "install" 2.642
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:11.559
Then the running Tails is installed on USB drive "install" 18.071
And there is a random seed on USB drive "install" 5.972
And there is a persistence partition on USB drive "install" 0.087
And the USB drive "install" contains the same files as my persistent storage 3.744
After features/support/hooks.rb:326 2.487
After features/support/hooks.rb:100 0.144
Tags: @product
2:40.344
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.268
And I temporarily create a 7200 MiB disk named "install" 0.055
And I plug USB drive "install" 2.669
And I install Tails to USB drive "install" by cloning 1:57.000
Then the running Tails is installed on USB drive "install" 20.208
And there is a random seed on USB drive "install" 6.024
And there is no persistence partition on USB drive "install" 0.116
After features/support/hooks.rb:326 2.102
After features/support/hooks.rb:100 0.093
Tags: @product
2:28.068
Before features/support/hooks.rb:269 0.002
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.943
And I have started Tails from DVD without network and logged in 8.844
And I clone USB drive "__internal" to a temporary USB drive "install" 1.275
And I plug USB drive "install" 3.700
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:43.110
Then the running Tails is installed on USB drive "install" 14.238
And there is a random seed on USB drive "install" 6.871
And there is no persistence partition on USB drive "install" 0.083
After features/support/hooks.rb:326 2.045
After features/support/hooks.rb:100 0.117
Tags: @product @uefi
3:13.306
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.515
And I power off the computer 0.575
And the computer is set to boot in UEFI mode 0.061
When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.154
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:326 10.553 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:57:56)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/24/artifact/build-artifacts/00:57:56_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/24/artifact/build-artifacts/00:57:56_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/24/artifact/build-artifacts/00:57:56_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.123
Tags: @product
1:47.669
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.530
And I plug and mount a USB drive containing a Tails USB image 42.649
And I create a 7200 MiB disk named "usbimage" 0.046
And I plug USB drive "usbimage" 2.366
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.075
After features/support/hooks.rb:326 2.201
After features/support/hooks.rb:100 0.096
Tags: @product
1:34.374
Before features/support/hooks.rb:269 0.003
Given a computer 0.194
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:32.668
Then Tails is running from USB drive "usbimage" 0.347
And the label of the system partition on "usbimage" is "Tails" 0.378
And the system partition on "usbimage" is an EFI system partition 0.249
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.165
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.155
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.099
And the system partition on "usbimage" has the expected flags 0.116
After features/support/hooks.rb:326 0.604
After features/support/hooks.rb:100 0.007