Project Number Date
test_Tails_ISO_20531-early-reporting-of-bad-devices 19 13 Dec 2024, 17:31

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 75 0 0 0 0 75 10 0 10 18:24.399 Passed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
26.346
Before features/support/hooks.rb:269 0.026
Given I have started Tails from DVD without network and logged in 8.367
And I temporarily create a 4 GiB disk named "gptfat" 0.049
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.256
And I plug USB drive "gptfat" 2.422
When I start Tails Installer 9.209
Then I am told by Tails Installer that the destination device "is too small" 0.041
After features/support/hooks.rb:326 1.034
After features/support/hooks.rb:100 0.001
Tags: @product
21.823
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 9.014
And I temporarily create a 7200 MiB disk named "temp" 0.068
And I start Tails Installer 9.311
But a suitable USB device is not found 0.022
When I plug USB drive "temp" 3.079
Then the "temp" USB drive is selected 0.098
When I unplug USB drive "temp" 0.201
Then a suitable USB device is not found 0.025
After features/support/hooks.rb:326 1.721
After features/support/hooks.rb:100 0.000
Tags: @product
2:35.099
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.320
And I temporarily create a 7200 MiB disk named "install" 0.038
And I create a gpt partition with a vfat filesystem on disk "install" 6.407
And I plug USB drive "install" 3.580
And I install Tails to USB drive "install" by cloning 1:57.078
Then the running Tails is installed on USB drive "install" 13.612
And there is a random seed on USB drive "install" 5.977
But there is no persistence partition on USB drive "install" 0.083
After features/support/hooks.rb:326 1.342
After features/support/hooks.rb:100 0.122
Tags: @product
2:14.502
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.003
And I temporarily create a 7200 MiB disk named "install" 0.041
And I plug USB drive "install" 2.546
And I install Tails to USB drive "install" by cloning 1:43.148
Then the running Tails is installed on USB drive "install" 14.768
And there is a random seed on USB drive "install" 5.928
But there is no persistence partition on USB drive "install" 0.064
After features/support/hooks.rb:326 1.183
After features/support/hooks.rb:100 0.124
Tags: @product
2:51.714
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.227
And I create a file in the Persistent directory 0.095
And I temporarily create a 7200 MiB disk named "install" 0.039
And I create a gpt partition with a vfat filesystem on disk "install" 6.374
And I plug USB drive "install" 2.722
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:2.259
Then the running Tails is installed on USB drive "install" 17.726
And there is a random seed on USB drive "install" 6.018
And there is a persistence partition on USB drive "install" 0.075
And the USB drive "install" contains the same files as my persistent storage 3.174
After features/support/hooks.rb:326 1.857
After features/support/hooks.rb:100 0.134
Tags: @product
2:27.548
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.429
And I temporarily create a 7200 MiB disk named "install" 0.060
And I plug USB drive "install" 2.807
And I install Tails to USB drive "install" by cloning 1:47.378
Then the running Tails is installed on USB drive "install" 18.803
And there is a random seed on USB drive "install" 5.970
And there is no persistence partition on USB drive "install" 0.098
After features/support/hooks.rb:326 1.432
After features/support/hooks.rb:100 0.132
Tags: @product
2:26.775
Before features/support/hooks.rb:269 0.003
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.029
And I have started Tails from DVD without network and logged in 8.401
And I clone USB drive "__internal" to a temporary USB drive "install" 1.278
And I plug USB drive "install" 2.648
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:42.874
Then the running Tails is installed on USB drive "install" 14.531
And there is a random seed on USB drive "install" 5.948
And there is no persistence partition on USB drive "install" 0.061
After features/support/hooks.rb:326 1.306
After features/support/hooks.rb:100 0.119
Tags: @product @uefi
1:50.650
Before features/support/hooks.rb:269 0.008
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.383
And I power off the computer 0.358
And the computer is set to boot in UEFI mode 0.025
When I start Tails from USB drive "__internal" with network unplugged and I login 1:35.521
Then Tails is running from USB drive "__internal" 0.377
And the boot device has safe access rights 2.936
And Tails has started in UEFI mode 0.046
After features/support/hooks.rb:326 0.652
After features/support/hooks.rb:100 0.006
Tags: @product
1:39.251
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.023
And I plug and mount a USB drive containing a Tails USB image 40.765
And I create a 7200 MiB disk named "usbimage" 0.036
And I plug USB drive "usbimage" 2.339
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 48.086
After features/support/hooks.rb:326 2.319
After features/support/hooks.rb:100 0.097
Tags: @product
1:30.687
Before features/support/hooks.rb:269 0.003
Given a computer 0.145
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:29.257
Then Tails is running from USB drive "usbimage" 0.363
And the label of the system partition on "usbimage" is "Tails" 0.298
And the system partition on "usbimage" is an EFI system partition 0.207
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.153
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.102
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.079
And the system partition on "usbimage" has the expected flags 0.078
After features/support/hooks.rb:326 0.668
After features/support/hooks.rb:100 0.006