Project Number Date
test_Tails_ISO_20531-early-reporting-of-bad-devices 18 13 Dec 2024, 16:46

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 71 1 3 0 0 75 9 1 10 21:37.320 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
27.092
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.291
And I temporarily create a 4 GiB disk named "gptfat" 0.058
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.317
And I plug USB drive "gptfat" 2.539
When I start Tails Installer 9.818
Then I am told by Tails Installer that the destination device "is too small" 0.067
After features/support/hooks.rb:326 2.654
After features/support/hooks.rb:100 0.001
Tags: @product
23.947
Before features/support/hooks.rb:269 0.004
Given I have started Tails from DVD without network and logged in 10.092
And I temporarily create a 7200 MiB disk named "temp" 0.599
And I start Tails Installer 9.860
But a suitable USB device is not found 0.032
When I plug USB drive "temp" 2.994
Then the "temp" USB drive is selected 0.125
When I unplug USB drive "temp" 0.211
Then a suitable USB device is not found 0.031
After features/support/hooks.rb:326 1.637
After features/support/hooks.rb:100 0.000
Tags: @product
3:1.407
Before features/support/hooks.rb:269 0.004
Given I have started Tails from DVD without network and logged in 9.570
And I temporarily create a 7200 MiB disk named "install" 0.356
And I create a gpt partition with a vfat filesystem on disk "install" 8.420
And I plug USB drive "install" 2.578
And I install Tails to USB drive "install" by cloning 2:17.800
Then the running Tails is installed on USB drive "install" 16.548
And there is a random seed on USB drive "install" 6.045
But there is no persistence partition on USB drive "install" 0.086
After features/support/hooks.rb:326 1.385
After features/support/hooks.rb:100 0.123
Tags: @product
2:27.640
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.706
And I temporarily create a 7200 MiB disk named "install" 0.056
And I plug USB drive "install" 2.639
And I install Tails to USB drive "install" by cloning 1:55.638
Then the running Tails is installed on USB drive "install" 14.476
And there is a random seed on USB drive "install" 6.046
But there is no persistence partition on USB drive "install" 0.077
After features/support/hooks.rb:326 1.372
After features/support/hooks.rb:100 0.127
Tags: @product
3:6.853
Before features/support/hooks.rb:269 0.004
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 19.588
And I create a file in the Persistent directory 0.095
And I temporarily create a 7200 MiB disk named "install" 0.045
And I create a gpt partition with a vfat filesystem on disk "install" 6.630
And I plug USB drive "install" 2.763
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:10.395
Then the running Tails is installed on USB drive "install" 17.116
And there is a random seed on USB drive "install" 6.069
And there is a persistence partition on USB drive "install" 0.077
And the USB drive "install" contains the same files as my persistent storage 4.070
After features/support/hooks.rb:326 2.368
After features/support/hooks.rb:100 0.142
Tags: @product
2:40.426
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.621
And I temporarily create a 7200 MiB disk named "install" 0.045
And I plug USB drive "install" 3.118
And I install Tails to USB drive "install" by cloning 1:55.968
Then the running Tails is installed on USB drive "install" 20.490
And there is a random seed on USB drive "install" 6.093
And there is no persistence partition on USB drive "install" 0.087
After features/support/hooks.rb:326 2.809
After features/support/hooks.rb:100 0.095
Tags: @product
2:46.374
Before features/support/hooks.rb:269 0.003
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.255
And I have started Tails from DVD without network and logged in 9.748
And I clone USB drive "__internal" to a temporary USB drive "install" 1.369
And I plug USB drive "install" 2.639
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:57.251
Then the running Tails is installed on USB drive "install" 19.015
And there is a random seed on USB drive "install" 6.023
And there is no persistence partition on USB drive "install" 0.072
After features/support/hooks.rb:326 1.180
After features/support/hooks.rb:100 0.104
Tags: @product @uefi
3:14.752
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.058
And I power off the computer 0.367
And the computer is set to boot in UEFI mode 0.028
When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.297
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:326 20.611 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:59:19)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/18/artifact/build-artifacts/00:59:19_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/18/artifact/build-artifacts/00:59:19_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/18/artifact/build-artifacts/00:59:19_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.080
Tags: @product
1:53.988
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 9.367
And I plug and mount a USB drive containing a Tails USB image 45.257
And I create a 7200 MiB disk named "usbimage" 0.043
And I plug USB drive "usbimage" 2.356
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.963
After features/support/hooks.rb:326 2.757
After features/support/hooks.rb:100 0.105
Tags: @product
1:34.837
Before features/support/hooks.rb:269 0.003
Given a computer 0.187
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:33.180
Then Tails is running from USB drive "usbimage" 0.425
And the label of the system partition on "usbimage" is "Tails" 0.345
And the system partition on "usbimage" is an EFI system partition 0.227
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.183
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.097
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.090
And the system partition on "usbimage" has the expected flags 0.098
After features/support/hooks.rb:326 0.783
After features/support/hooks.rb:100 0.007