Project Number Date
test_Tails_ISO_20531-early-reporting-of-bad-devices 15 12 Dec 2024, 20:41

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 71 1 3 0 0 75 9 1 10 21:13.587 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
28.330
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 10.484
And I temporarily create a 4 GiB disk named "gptfat" 0.046
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.255
And I plug USB drive "gptfat" 2.427
When I start Tails Installer 9.048
Then I am told by Tails Installer that the destination device "is too small" 0.067
After features/support/hooks.rb:326 0.745
After features/support/hooks.rb:100 0.001
Tags: @product
20.510
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.573
And I temporarily create a 7200 MiB disk named "temp" 0.053
And I start Tails Installer 8.798
But a suitable USB device is not found 0.020
When I plug USB drive "temp" 2.663
Then the "temp" USB drive is selected 0.120
When I unplug USB drive "temp" 0.243
Then a suitable USB device is not found 0.038
After features/support/hooks.rb:326 0.813
After features/support/hooks.rb:100 0.000
Tags: @product
2:35.942
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 9.061
And I temporarily create a 7200 MiB disk named "install" 0.047
And I create a gpt partition with a vfat filesystem on disk "install" 6.427
And I plug USB drive "install" 2.496
And I install Tails to USB drive "install" by cloning 1:56.982
Then the running Tails is installed on USB drive "install" 14.861
And there is a random seed on USB drive "install" 5.992
But there is no persistence partition on USB drive "install" 0.072
After features/support/hooks.rb:326 1.149
After features/support/hooks.rb:100 0.123
Tags: @product
2:26.041
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.547
And I temporarily create a 7200 MiB disk named "install" 0.051
And I plug USB drive "install" 2.567
And I install Tails to USB drive "install" by cloning 1:54.643
Then the running Tails is installed on USB drive "install" 13.718
And there is a random seed on USB drive "install" 6.444
But there is no persistence partition on USB drive "install" 0.067
After features/support/hooks.rb:326 1.588
After features/support/hooks.rb:100 0.159
Tags: @product
3:1.953
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.390
And I create a file in the Persistent directory 0.103
And I temporarily create a 7200 MiB disk named "install" 0.051
And I create a gpt partition with a vfat filesystem on disk "install" 6.526
And I plug USB drive "install" 2.662
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:8.659
Then the running Tails is installed on USB drive "install" 20.419
And there is a random seed on USB drive "install" 6.205
And there is a persistence partition on USB drive "install" 0.084
And the USB drive "install" contains the same files as my persistent storage 3.850
After features/support/hooks.rb:326 2.745
After features/support/hooks.rb:100 0.153
Tags: @product
3:1.575
Before features/support/hooks.rb:269 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.417
And I temporarily create a 7200 MiB disk named "install" 0.041
And I plug USB drive "install" 2.592
And I install Tails to USB drive "install" by cloning 2:18.787
Then the running Tails is installed on USB drive "install" 20.620
And there is a random seed on USB drive "install" 6.025
And there is no persistence partition on USB drive "install" 0.090
After features/support/hooks.rb:326 1.952
After features/support/hooks.rb:100 0.086
Tags: @product
2:43.116
Before features/support/hooks.rb:269 0.003
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.698
And I have started Tails from DVD without network and logged in 10.840
And I clone USB drive "__internal" to a temporary USB drive "install" 1.646
And I plug USB drive "install" 2.572
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:55.459
Then the running Tails is installed on USB drive "install" 16.624
And there is a random seed on USB drive "install" 6.153
And there is no persistence partition on USB drive "install" 0.121
After features/support/hooks.rb:326 1.461
After features/support/hooks.rb:100 0.125
Tags: @product @uefi
3:15.310
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.340
And I power off the computer 0.565
And the computer is set to boot in UEFI mode 0.034
When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.369
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:326 10.638 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 01:01:31)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/15/artifact/build-artifacts/01:01:31_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/15/artifact/build-artifacts/01:01:31_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/15/artifact/build-artifacts/01:01:31_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.069
Tags: @product
1:50.698
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.399
And I plug and mount a USB drive containing a Tails USB image 45.082
And I create a 7200 MiB disk named "usbimage" 0.051
And I plug USB drive "usbimage" 2.402
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 54.763
After features/support/hooks.rb:326 1.956
After features/support/hooks.rb:100 0.097
Tags: @product
1:30.106
Before features/support/hooks.rb:269 0.003
Given a computer 0.158
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.577
Then Tails is running from USB drive "usbimage" 0.366
And the label of the system partition on "usbimage" is "Tails" 0.325
And the system partition on "usbimage" is an EFI system partition 0.244
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.139
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.133
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077
And the system partition on "usbimage" has the expected flags 0.083
After features/support/hooks.rb:326 0.715
After features/support/hooks.rb:100 0.014